Campervan Electrical & 12V/24V Wi-Fi Power Systems

Lithium Battery SOH Telemetry: Monitoring In-Van Power Consumption from Remote Trailheads

Check battery state of charge, state of health and fridge temperature from the trail. Gateway options, data costs and alerts that matter.

Remote battery telemetry pipelineRemote battery telemetry pipelineShunt + BMSSoC, SOH, tempGatewayBluetooth /VE.DirectVan routercellular / satDashboardcloud orTailscalePhone alertsfrom thetrailheadKnow the van is safe before you start the hike back.
Schematic #46 — Lithium Battery SOH Telemetry: Monitoring In-Van Power Consumption from Remote Trailheads

When you leave the van to hike for the day with the fridge running, you want to know the battery is fine. Remote telemetry lets you check state of charge and receive alerts from anywhere you have signal.

What to monitor

  • State of charge (SoC): from a shunt-based battery monitor.
  • State of health (SOH): capacity relative to new, reported by many BMS units.
  • Temperatures: battery, cabinet and fridge.
  • Charge sources: solar and alternator input.

Gateway options

  1. Vendor gateways: plug-and-play, upload to vendor cloud dashboards.
  2. DIY: a small Linux device reads Bluetooth or serial data and pushes it to a dashboard.

Data and power

Telemetry uses very little data. Gateways typically draw a few watts. Keep the router and gateway on essential circuits so they survive a low-voltage disconnect.

Useful alerts

  • SoC below 30 %.
  • Battery temperature near charging limits.
  • Fridge temperature above safe levels.
  • Unexpected high current draw.

SOH over time

Track SOH monthly. A gradual decline is normal; sudden drops indicate cell imbalance or a failing battery that should be checked before a long trip.

Safety note: figures are typical planning values. Confirm ratings on your hardware labels and follow local electrical and radio regulations. When in doubt, have DC installations checked by a qualified auto-electrician.