Questions from the road
Frequently asked questions
Short answers to what vanlifers ask most. Each one links to the deeper guides.
No — and you usually should not. Inverters waste 10–30 W at idle plus 8–15 % in conversion. The Starlink Mini, most travel routers and many 5G routers accept DC input directly. Feed them from fused 12 V circuits, using a DC-DC converter where a specific voltage is needed.
Total your daily watt-hours (laptop, dish, router, fridge, lights), divide by system voltage × usable depth of discharge, then multiply by the days of autonomy you want. For a typical full-time remote worker with a Starlink Mini and compressor fridge, that lands around 200 Ah of 12.8 V LiFePO4.
They fail in different ways, so the best answer is both. Satellite works where towers do not exist but needs open sky; cellular works under trees and in towns but fades in remote valleys. A router with failover or bonding gives you the strengths of each.
Yes, in most cases. A van is a steel box that attenuates signal heavily. Moving a 4x4 MIMO antenna outside and above the roofline typically improves signal strength by 6–15 dB and noticeably improves signal quality, which translates into faster and more stable data.
It depends on the terminal, the mount, the service plan and local law. Only in-motion-approved hardware on a fixed, approved mount with a plan that permits in-motion use should be used on the move — and only by passengers.
Put a travel router between you and the campground network, use an encrypted tunnel (WireGuard VPN, Tailscale or WARP), encrypt DNS, and keep smart camper devices on a separate isolated network.
Not directly. LiFePO4 must not be charged below about 0 °C. Use batteries with low-temperature charge protection and built-in heating, or add thermostatically controlled heating pads, and keep the bank inside the heated living space.
Video calls typically use 0.5–1.5 GB per hour depending on quality. Add background sync and updates and many remote workers use 3–8 GB per day. Configure metered-connection settings and DNS filtering to keep background use under control.
The site is a flat-file PHP application: all 50 guides, diagrams and specs live in a PHP array. No database, Composer or build step is required — extract it into public_html and it runs.
Yes. Use the consultation form with your vehicle layout, power system and goals. Including your daily watt-hour estimate from the calculator speeds things up.
Still stuck?
Send your rig details and we will point you at the right fix.