Travel Routers, OpenWrt & Captive Portal Bypass

Managing Video Call Latency on Edge Cellular Connections Using CAKE Smart Queues

Bufferbloat makes calls stutter whenever someone uploads a photo. CAKE SQM on OpenWrt keeps latency low by shaping slightly below your real link speed.

Latency under load on an edge LTE linkLatency under load on an edge LTE linkIdle45 msUpload without SQM640 msUpload with CAKE SQM70 msShaping a little below link speed keeps queues inside your router, where CAKE manages them.
Schematic #41 — Managing Video Call Latency on Edge Cellular Connections Using CAKE Smart Queues

Bufferbloat happens when upstream equipment holds large queues. A single photo upload fills the queue and every other packet — including your voice — waits behind it. CAKE smart queue management moves the bottleneck into your router, where it can be managed fairly.

Measure first

Run a bufferbloat test while uploading and downloading. If latency jumps by hundreds of milliseconds under load, SQM will help.

Install and configure

  1. Install luci-app-sqm.
  2. Select the WAN interface in Network → SQM QoS.
  3. Set download and upload to about 85–90 % of measured speeds.
  4. Choose cake with piece_of_cake.qos.
  5. Set link layer overhead appropriate for your connection type.

Variable links

Cellular and satellite speeds vary. Fixed shaping rates that are too high stop working; too low waste bandwidth. Start conservative, or use autorate scripts that adjust shaping based on measured latency.

Per-host fairness

CAKE can share bandwidth fairly between devices, so a laptop syncing cloud storage does not starve a phone on a call. Enable per-host isolation options in advanced settings.

Check results

Repeat the bufferbloat test. A well-tuned setup keeps latency increases under load small, and calls stay smooth even while photos upload.

Safety note: figures are typical planning values. Confirm ratings on your hardware labels and follow local electrical and radio regulations. When in doubt, have DC installations checked by a qualified auto-electrician.