Digital Nomad Vanlife Ergonomics & Workstation Security

Vanlife Cyber Defense: Isolating Smart Camper IoT (Fridges, Inverters) from Work Laptops

Battery monitors, fridge apps and smart inverters run old firmware with cloud connections. Put them on their own isolated network so a compromise never reaches your work machine.

Wi-Fi repeater upstream feeding isolated work LAN and IoT guest LANWi-Fi repeater upstream feeding isolated work LAN and IoT guest LANUpstream: camp Wi-Fi / Starlink / LTEWork LAN (trusted)Work laptopPhoneNAS backupVoIP phoneIoT guest LAN (isolated)Fridge appInverter Wi-FiBattery monitorSmart lightsfirewall: no zone-to-zone forwarding
Schematic #19 — Vanlife Cyber Defense: Isolating Smart Camper IoT (Fridges, Inverters) from Work Laptops

A modern camper has a surprising number of connected devices: inverter Wi-Fi dongles, battery shunts, compressor fridges, heater controllers and smart lights. Many are cheap modules with infrequent updates, default credentials and permanent cloud connections. If one is compromised, you do not want it on the same network as your work laptop.

Design: two zones, one router

  • Work LAN: laptops, phones, VoIP desk phone, backup drive. Strong WPA3 or WPA2-AES password, 5 GHz.
  • IoT network: everything that is "smart". 2.4 GHz (most IoT modules only support it), separate password, client isolation enabled.

Implementation on a GL.iNet or OpenWrt router

  1. Enable the Guest Network — on most travel routers this is already an isolated zone.
  2. Confirm the firewall forwards guest → WAN but rejects guest → LAN.
  3. Turn on AP isolation so IoT devices cannot talk to each other.
  4. Connect every smart device to the guest SSID and re-pair apps.

But my phone app needs to see the fridge

Some apps discover devices locally. Two options: use the manufacturer's cloud mode so the phone reaches the device via the internet, or put the phone on the IoT network temporarily while configuring. Avoid creating permanent LAN-to-IoT allow rules unless you scope them to one IP and port.

Extra hardening

  • Change every default password and disable unused features such as UPnP.
  • Restrict the router admin page to the LAN zone.
  • Use DNS filtering on the IoT zone to block known malicious and tracking domains.
  • Keep firmware updated; set a monthly reminder.

Bonus: bandwidth protection

Segmentation also lets you rate-limit the IoT zone so a firmware download or cloud sync never competes with a video call on a metered connection.

Safety note: figures are typical planning values. Confirm ratings on your hardware labels and follow local electrical and radio regulations. When in doubt, have DC installations checked by a qualified auto-electrician.